easyRESCUE - lifejackets24.com | Lifejackets with internal AIS S.A.R.T.

Search
Go to content

Main menu:

easyRESCUE

easyRESCUE A
easyRESCUE BW COM
AIS SART

easyRESCUE-Automatic

easyRESCUE-BW-COM

Without AIS S.A.R.T.

The AIS S.A.R.T. „easyRESCUE-Automatic“ contains besides the manual activation an additional automatic activation by means of full water contact. The function only triggers if an electrical contact is given between two points by water for more than a second. The unit is 100% splash water proof.
The easyRESCUE-Automatic is used with the STORMY JACKET.

The AIS S.A.R.T. „easyRESCUE-BW-COM“ contains besides the manual activation and the automatic activation by means of full water contact an additional third automatic function: by means of rip cord and magnetic switch. If the balloon of the automatic life jacket inflates, the rip cord gets in tension and is pulled away from the unit. The magnetic switch is no longer closed and triggers the AIS S.A.R.T.
The easyRESCUE-BW-COM is used in all the automatic life jackets we present here.

AIS SART 2

With AIS S.A.R.T.

barra
 

easyRESCUE General Information

The easyRESCUE enables to display the current position of a person in distress by means of AIS technology on a PC screen or chart plotter.
The unit transmits a recurring emergency AIS S.A.R.T. radio signal via VHF to all AIS devices within range.
The easyRESCUE is an authorized rescue device, so called “AIS S.A.R.T.”. the unit has got full approvals of world’s most important institutions, which are the German BSH, the US FCC and the United States Coast Guard. Additional the unit is SOLAS ready. By means of this high approving level the easyRESCUE is outstanding in the market for AIS S.A.R.T. in this size.

Function

The activation of the unit depends on the different type

  • easyRESCUE A040

- manually by pressing a button

  • easyRESCUE-Automatic

- manually by pressing a button
- automatically by means of full water contact

  • easyRESCUE-BW-COM

-manually by pressing a button
-automatically by means of full water contact
- automatically by means of rip cord and magnetic switch
Being activated once, an easyRESCUE transmits a recurring standardized AIS emergency message

several times per minute received by every AIS device within range. "Live" position of a person in distress is shown on a PC screen or chart plotter. This enables every vessel with AIS aboard within range to assist with the rescue. AIS S.A.R.T. – the fastest rescue possible!

What do I need to run the easyRESCUE units?

You’ll need no further devices to run the easyRESCUE. To display the position on chart plotter you only need at least an AIS receiver. To display on PC screen the used software has to be AIS capable.


 
 
Back to content | Back to main menu