Secumar Alpha 275 3D H PLB TWIN SPR - | Lifejackets with internal AIS S.A.R.T.

Go to content

Main menu:

Secumar Alpha 275 3D H PLB TWIN SPR

Secumar Alpha 275 3D H PLB TWIN SPR

Price: 1275,90 €* with easyRESCUE-BW-COM
Price: 1375,90 €* with easyRESCUE-PRO
Price: 1395,90 €* with easyRESCUE PRO (BT)

* All prices include VAT

Add to chart

Secumar Alpha 275 3D H PLB TWIN SPR

This design combines two important innovations in lifejacket technology.

The patented buoyancy chamber design is built with a double inflatable chamber so for extra safety, the second compartment can be filled by a simple tug on a cord to manually operate the CO2 cylinder, thereby maintaining the full buoyancy. Also, the 3D design provides considerable buoyancy on the front chest area, offering much enhanced righting moment to any unfortunate casualty in the water, turning them quickly onto their backs – very important if wearing heavy foul weather clothing or a tool belt.

An optional easyRESCUE can be stored in the lifejacket and is clearly visible through an inspection window from the outside. Due to the 3D buoyancy chamber it is placed at the highest possible point in order to allow an optimal radiation performance.




General technical data


Secumar Alpha 275 3D H PLB TWIN SPR

Part No.:



EN ISO 12402-2
SOLAS 74 (MSC.200(80))
EN ISO 12401 (only lifejacket with safety harness)


approx. 290 N


Dark Blue with removable orange SPR Protective Stole


approx. 2.4 kg


60 g CO2-Dock


50 kg and more body weight up to 175 cm chest measurement

Temperature range:

Storage: -54 °C to +70 °C
Operation: -10 °C to +70 °C

Geographical range:



Inflatable Universal work vest, WSA, police, customs, inland waterway, maritime, locks, hydraulic engineering, dredging, civil engineering, water treatment plants, Stevedoring, Mooring, Offshore
Removable special protection cover
for workspaces that go beyond the normal working life. Fire brigades, technical relief organizations as well as ship building typical occupational groups such as Welders have special demands on their equipment.
Strong heat development, coloring and oil spills, flying sparks and hot metal splashes are just some emerging risks to which the SPR protective cover provides resistance.

* to protect the SECUMAR Pill/Pill-Box against premature disintegration caused by high atmospheric humidity/temperature SECUMAR highly recommends to adapt the changing interval to these specific areas. The standard interval should be shortened to an appropriate period.


Protective stole

Integrated Safety Harness
acc. to EN ISO 12401:

– / • (only lifejacket with safety harness)




Polyester with PVC coating

Closed with:

Zip fastener with predetermined breaking point Adjustment waist belt: 1 lateral slider
Buckle: SECUMAR Click-Buckle,

Adjustment waist belt:

1 lateral slider


SECUMAR Click-Buckle, 50 mm

Lifting becket (3,2 kN):

Back strap:



Automatic, PLB

Pocket for accessories:


Pocket for nametag:

Thanks to the
SECUMAR-Window is the function check now easier than ever. At a glance can always be seen from the outside through a window in the protective stole whether the inflator is ready for use. With the patented SECUMAR CLICK-buckle the donning and doffing of the lifejacket is very easy, it is donned like a normal jacket. Even wearing gloves is it easy to use this buckle.
Removable SPR protective stole:
The special PVC coating of the protective stole
material is extremely tear and abrasion resistant (EN 530, procedure 1)
The puncture resistance was tested acc. EN 863. Resistant against small metal splashes, acc. EN 348th
Chemical resistance to selected chemicals acc. EN ISO 6529.


Buoyancy chamber


3D, twin chamber membrane technology



Oral valve:

Retro reflecting tape:

400 cm² (Material: 3M®)


Polyurethane-coated polyamide fabric

Overpressure valve:

Pocket for transmitter:

• (easyRESCUE A040-BW-COM)

Characteristics: The new type of buoyancy chamber design provides an outstanding ability to turn the wearer in a safe position on his back, even with heavy protective clothing. Additional to this the inflated buoyancy chamber is very comfortable to wear. Due to the 3D-design the visibility of the lifejacket increases significantly because a distress light and a PLB can be mounted in an approximately 20 cm higher position than in common lifejackets. The radiation performance of the PLB is significantly improved by this position. The activation of the PLB is mechanically by means of pull rope activation.
• Standard /Optional /– Not available


Inflation device


1. Chamber

2. Chamber


Automatic activation upon the SECUMAR Pill-Boxes contact with water.

Manual activation with rip cord.





4-in-1-Indicator visible through window



One single red-green-indicator offers an easy possibility of control and inspection before every use: SECUMAR Pill-Box is inserted, CO2-cartridge is full, CO2-cartridge is fitted correctly and activation lever is secured.

One single red-green-indicator offers an easy possibility of control and inspection before every use: CO2-cartridge is full, CO2-cartridge is fitted correctly and activation lever is secured.




Crutch strap:

Distress light:



2x 60 g CO2-Dock

Neck fleece:

• (detachable)

Buddy Line:


Signal whistle:


Instructions, multilanguage:

Characteristics: The neck fleece provides extra comfort in the neck area. It is detachable and easy to clean or exchange. The service label on the waist belt shows you at a glance when your lifejacket should be serviced again by the SECUMAR service.


easy RESCUE inside

This lifejacket is designed to be used with an integrated AIS SART, distress transmitter easyRESCUE. This emergency transmitter is available in two different versions:



The AIS S.A.R.T. "easyRESCUE" is a rescue device certified by SOLAS and the German Federal Maritime Agency BSH and thus meets the highest quality and safety standards, as they are required in commercial shipping. Additionally, the unit has been tested by the United States Coast Guard and the FCC.

When the floating body of the vest inflates in an emergency, a ripcord tears off a magnetic switch from the transmitter. This leads to an automatic activation of the AIS emergency beacon. The easyRESCUE now determines the current GPS position and sends it with a common worldwide standard distress signal via VHF radio technology. This distress signal contains important information, such as, for example, course and speed over ground of the accident victim.

Each vessel with an AIS receiver on board within a radius of up to 10 nautical miles will receive this signal and is informed of the emergency as well as detailed information regarding the victim and can participate in the rescue. The GPS position and the resulting course and speed over ground are updated every minute and sent 8 times per minute.
In the best case scenario, your own ship is equipped with AIS, which would provide the best chances for rescuing the accident victim as soon as possible. However, even if your own ship does not have AIS on board, then all the other ships can hurry to help.

More  ...


The easyRESCUE-PRO has been developed from the well-known and approved AIS S.A.R.T. device easyRESCUE. In addition to the AIS locating functionality, the easyRESCUE-PRO has got another built-in VHF alert: DSC distress call (MOB)

The easyRESCUE-PRO is identical in construction to the easyRESCUE-BW-COM, and provides as AIS SART the same functionality.
However, the device has got additionally the possibility of delivering a "distress call" via DSC radio. This happens at the same moment, in which also the AIS alarm is automatically activated. As a first step, an alert message is sent per DSC to the own ship in "closed loop". For this purpose the MNSI of the own ship must be programmed into the device. The "closed loop" is maintained for 5 minutes. In case of an acknowledgment of receipt within this time, optically and acoustically the victims will be visualized on the device, since the easyRESCUE-PRO has a built-in DSC receiver.
If the own ship has not acknowledge the „closed loop" alert, the easyRESCUE-PRO starts sending „open loop DSC distress call" (MOB) to all ships. Now the shore station or other ship stations nearby can acknowledge this message and the easyRESCUE-PRO will also stop transmitting via DSC.

More ...

Back to content | Back to main menu